COMPONENTS

Standard components:
- 1 x D43- P7 Digital Concealed 2 mode LED-lamp assembly 3.7V-6.0V
- 1 x P7-E2 Bezel
- 1 x E2 Body
- 1 x LRB-168A li-ion battery .
- 1 x 6A- tactical button switch tailcap with lanyard
- 1 x CH-02 AC charger, 3 hours charging (max)
- 1 X gift box

Optional:
- P7-E2 holster
- DH-02 AC charger, 3 hours charging (max)

Please note that P7-E2 bezel is compatible with wolf-eyes E2 series flashlights.

FEATURE

- Features a Seoul Semiconductors SSC P7 LED Emitter
- Up to 580 lumens of brightness when powered by 1 x LRB168A battery
- 2 modes function:
Default mode: Maximum brightness (100%) -> 30% brightness ->lowest brightness (2%)
Concealed mode: Strobe -> SOS-> Beacon signal
- P7-E2 bezel is compatible with wolf-eyes Eagle2 series flashlight
- Aerospace-grade Aluminum body, HA III Military grade hardanodized in black
- Lanyard attached and candle function, it can stand up on a flat surface as a candle
- Waterproof: IPX-8 standard

SPECIFICATIONS

Brightness:580Lumens (full brightness stage)
Runtime: full brightness stage: 1 hour with regulated output ; 2 hours with unregulated output.
Body:Aerospace grade aluminum construction.
Reflector: High temperature processed, layers of alloy coating films.
Finish: HA III Military grade
Lamp: SSC P7 LED Lamp Assembly 3.7-6.0V.
Switch: Rapid switch between Morse-on and lock-on with over 50,000 times life cycle.
O-ring sealed:Splash proof.
Beam: flood beam with good combination of throw
Weight without battery: 195g
Length: 151.50mm
Body diameter: 25.4mm
Head diameter: 47mm
Operation Temperature: -25℃-60℃
Color: Tactical black
Package: gift box

Digital LED instruction:
-Soft press till the light comes on 100%, then further pressing the switch will activate default mode functions, according to the sequence of "maximum brightness (100% brightness) -> 30% brightness -> 2% brightness". When you have reached the desired level, press the switch fully to keep the light on at that level.
-When switch on/off for 7 times in Default mode, the light will turn into concealed mode, according to the sequence of "Strobe -> SOS-> Beacon signal".
-After switched off the flashlight for 2 seconds, the default settings resume, and the lamp will enter full brightness when being switched on again.